Accessories

Shock Tube Splitters

Allows firing two shock tube lines from a single tube when close timing is critical.

Connection is a snap. Simply push the shock tube into the connector. To release, press the retaining ring while gently pulling the shock tube out.

Splitters can be ordered to fit Mil-Spec shock tube or standard commercial shock tube.

Ordering Information
(Click for pricing)

STY-COM Splitter for standard commercial shock tube

STY-MIL Splitter for Mil-Spec shock tube

Couplers

(click to enlarge)

Duke Pro's shock tube couplers allow you to connect Mil-Spec and thick-walled shock tube to standard commercial shock tube.

With this you can run lower cost standard commercial shock tube to the top of your drill hole, then convert to thick-wall or Mil-Spec to run down the hole.

Made from brass, these couplers are guaranteed to last at least 10,000 shots.

Ordering Information
(Click for pricing)

STCPL Coupler for Mil-Spec & thick-walled shock tube to standard commercial shock tube

STCPL-SC Joins two pieces of standard commercial shock tube.

STCPL-MS Joins two pieces of Mil-Spec or thick-walled shock tube.

Cutters

(click to enlarge)

Duke Pro's shock tube cutter have a single blade design to provide a safe non-sparking cut.

The blade is spring loaded to remain closed and may safely be carried in your pocket.

Simple one-hand operation.

Ordering Information
(Click for pricing)

STCUT Cutter for all shock tube